EasyManua.ls Logo

Studer 928 - Adjustments, repair; Accessories, options

Studer 928
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
928 Mixing Console
E 1/4 General
Edition: 07.02.01
1.2.3 Adjustments, repair
Danger: All internal adjustments as well as repair work on this product are to
be performed by skilled technicians!
Replacing the primary fuse: Supply unit, versions 1.918.210.00...211.81:
Switch the unit off, remove the mains lead plug from the mains supply
socket and then from the IEC type mains connector on the unit. The
fuse is located in the fuse holder contained in the IEC type mains con-
nector.
Use only an F 8 A H/250 V fuse.
Supply unit, version 1.918.213.00:
The primary fuse is located inside the power supply unit and cannot
be changed. In case of failure, the complete supply unit must be re-
placed. Please ask your nearest Studer representative.
1.2.4 Accessories, options
Accessories shipped with the 928 console: (Set: order No. 1.928.096.00)
5 Circlips, 2.3 mm Order No. 24.16.3023
1 Rotary knob, grey, Ø 10 mm Order No. 42.01.0203
1 Cap, dark grey, for button Ø 10 mm Order No. 42.01.0251
5 Rotary knobs, dark grey, Ø 11 mm Order No. 42.01.1200
5 Rotary knobs, red, Ø 11 mm Order No. 42.01.1202
5 Rotary knobs, yellow, Ø 11 mm Order No. 42.01.1204
5 Rotary knobs, green, Ø 11 mm Order No. 42.01.1205
5 Rotary knobs, blue, Ø 11 mm Order No. 42.01.1206
5 Rotary knobs, bright grey, Ø 11 mm Order No. 42.01.1208
1 Rotary knob, dark grey, Ø 15 mm Order No. 42.01.1220
1 Rotary knob, bright grey, Ø 15 mm Order No. 42.01.1228
5 Rotary knobs, lower, dark grey, Ø 15 mm Order No. 42.01.1240
2 TRS plugs Order No. 54.02.0601
2 Cap, red Order No. 55.15.0912
2 Cap, yellow Order No. 55.15.0914
2 Cap, green Order No. 55.15.0915
1 Allen screwdriver, short, size 2 Order No. 98.00.0612
1 Hexagonal screwdriver, size 2 Order No. 98.00.2022
1 Hexagonal key, size 2 Order No. 98.00.2405
1 Hexagonal key, size 2.5 Order No. 98.00.2406
5 Oval-head screws, M3×8, w. washer Order No. 1.010.022.21
6 Fader coupling bridges, 42 mm Order No. 1.911.000.07
2 Fader knobs (P+G), red Order No. 1.911.000.42
2 Fader knobs (P+G), orange Order No. 1.911.000.43
2 Fader knobs (P+G), yellow Order No. 1.911.000.44
2 Fader knobs (P+G), green Order No. 1.911.000.45
2 Fader knobs (P+G), blue Order No. 1.911.000.46
2 Fader knobs (P+G), grey Order No. 1.911.000.48
2 Fader knobs (P+G), white Order No. 1.911.000.49
2 Module extractors Order No. 1.912.000.06

Related product manuals