24
This is a copy of the hardware button on the front-panel. Press to enable or disable sent to
the solo monitor bus.
⑤ Mute
Like Solo, this is a copy of the hardware button on the front-panel. Press to mute or unmute
the channel, which will effectively mute or unmute all pre- and post-fader sends of the active
channel to all busses, including master lr.
⑥ Fader control
This is a copy of the physical fader of the selected channel. You can change the on-screen
fader through touch and the physical fader will follow accordingly. Double-tap the numeric
parameter control to reset the parameter to its default value.
⑦ Level meter display
This displays the pre-fader level of the signal, so regardless the setting of the fader, signal
will be shown here if present.
To Next Page
Loading...
