4
SAFETY INSTRUCTIONS
READ THIS BEFORE YOU USE YOUR PRODUCT
1. Before connecting the A.C. power cord make sure the digiLiVE operating
voltage is suitable for your local supply : 100-240V AC 50/60Hz.
2. Only use the A.C. power cord / mains lead and universal voltage power supply
supplied with this product. Replace it if it becomes damaged in any way.
3. Never operate without, or remove the safety ground (earth) from the A.C.
power cord / mains lead.
4. Do not attempt to remove any screws or panels. There are no user
serviceable parts inside.
5. Do no operate the unit next to heat sources such as radiators.
6. The unit should not be operated or stored near rain or moisture.
7. This equipment must not be exposed to dripping or splashing and no
objects filled with liquids should be placed on top of it.
WARNING : THIS APPARATUS MUST BE EARTHED (GROUNDED)
To Next Page
Loading...
