Studiomaster digiLiVE 16 - Specifications

46
digiLiVE16 SPECIFICATIONS
Input Characteristics
Output impedance of signal generator:150Ω
Inpu
t
Input Impedance Connecto
r
Maximum Inpu
t
Sensitivity Range
MIC INPUT
1.5
K
Ω
X
LR
(Balanced)
+16 dBu 0 to
+60dBu
60dB
LINE INPUT
10
K
Ω
TRS(Balanced) +30 dBu -
2
0 to
+40dBu
ST INPUT
10
K
Ω
TRS(Balanced) +22dBu -
2
0 to
+20dBu
4
0dB
Output Characteristics
Outpu
t
Outpu
t
Impedance
Connecto
r
Residual Output
Noise
Maximum Outpu
t
BUS OUT
4
70Ω
X
LR (Balanced) -90dBu +18dBu
PHONES
OUT
100Ω
TRS(Unbalanced) -92dBu +22dBu
Frequency Response
Fs= 48 kHz @20 Hz–20 kHz, referenced to the nominal output level @1 kHz
Inpu
t
Outpu
t
RL Conditions Min TYP Ma
x
Uni
t
MIC INPUT BUS 600
Ω
0dBu @20 Hz–
2
0 kHz, GAIN: 0dB -0.2 0 0.1 dB
ST INPUT -0.2 0 0.1
Total Harmonic Distortion
Fs= 48 kHz @ Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
Inpu
t
Outpu
t
RL Conditions Min TYP Ma
x
Uni
t
MIC INPUT BUS 600
Ω
0dBu @20 Hz–
2
0 kHz, GAIN: 0dB 0.00
8
%
ST INPUT 0.00
5

Hum&Noise
Fs= 48 kHz, EIN= Equivalent Input Noise@ 20Hz–20kHz
Inpu
t
Outpu
t
RL Conditions Min TYP Ma
x
Uni
t
INPUT 1-16 BUS 600
Ω
Rs= 150Ω
,
GAIN: Max. Master fader
at nominal level and one Ch fader at
nominal level.
-
126
EIN
dBu
-70
Rs= 150Ω
,
GAIN: Min. Master fader at
nominal level and one Ch fader at
nominal level.
-88
A
ll INPUT
Rs= 150Ω
,
GAIN: Min. Master fader at
nominal level and all Ch1-16 in faders
at nominal level.
-78
Residual Outpu
t
Noise, BUS Master
Off
-90
Hum & Noise are measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite
dB/octave attenuation.