41
① Scene List
Scene List contains number (No)、selection (Sel), name (Name) and create/update time
(Time). Select a scene through a single press which will be highlighted with "Sel" (select)
illuminated.
② Operation
Delete：Delete scenes. When selecting a scene, single press the button, a dialog pops
up“Are you sure you want to delete this scene?”，single press“Yes” to delete the
scene, single press“No” to cancel delete.
Rename：Rename scene. When selecting a scene, single press the button, then you could
edit the name the scene through a soft-keyboard popping up. Press confirm once you have
renamed the scene.
Copy：Copy scene. When select a scene, single press the button, to insert copied new
scene after selected scene, the system will automatically name it as “(copied scene
name)_copy”.
New：Create scene. Single press the button, to insert new scene after selected scene or
current scene, system will name it as “New *”（* being a number, equals to the number of
scene+1）.
Save：Save scene. Single press the button, to save console’s settings to the current scene.
Load: Load scene. When selecting a scene, single press the button to load the scene。
Import：load a scene from a USB drive. Single press the button, a dialog pops
up“Compressed file list”，select scene* list beneath “Compressed file list”, to load scene
from USB disk to the scene list on the console. If loaded successfully, the system
prompts“Import success”, press“Confirm” and selected scene will be copied to the
console from the USB drive. If USB drive cannot be found, then prompts “No USB stick
detected, please reconnect and try again.”； If cannot find scene file in the USB drive,
then the digiLiVE prompts“Scenes file not found on USB stick!”. If the loaded scene
shares a same name with the scene file in the console, the system will automatically rename
it as“(original file name)_USB”。
Export：Export scene file from console to USB drive. Single press
“Sel”option n the
scene list, to select scene to be exported. They can be exported individually or in multiples.
Then single press the“Export” button. If export is successful, the system
prompts“Export success”, press“Confirm” to export selected scenes to USB drive. If a
USB drive cannot be found, then prompts“No USB stick detected, please reconnect and
To Next Page
Loading...
