EN / 10-2015 / 1000683 © STULZ GmbH, Hamburg
-
10
-
Safety STULZUltraSonic-SystemforDirectRoomHumidicationBNB-
CAUTION
Danger due to incorrectly congured components.
Duringinstallationandconguration,itmaybenecessarytoadditionallycongurefurthercomponents
for use with the STULZ UltraSonicBNBultrasonichumidier.
●
Beforestart-up,alwayscheckthecurrentcongurationofallaffectedcomponents(referalsotothe
documentationoftherespectivecomponents).
NOTICE
2.3. Qualication requirements for personnel
All electrical work must be performed exclusively by authorized specialist electricians. Specialist person-
nel within the context of this documentation are persons who are familiar with the electrical installation,
start-up,maintenanceandrepairofthesystem,andareinpossessionofthefollowingqualications:
●
Successful,certiedcompletionoftraininginelectricalengineering
●
Familiarity with the technical documentation
All water installation work must be performed exclusively by authorized and trained specialist personnel.
Specialist personnel within the context of this documentation are persons who are familiar with the elec-
trical installation, start-up, maintenance and repair of the system, and are in possession of the following
qualications:
●
Instruction by an expert
●
Familiarity with the technical documentation
All work relating to transport, storage and operation must be performed exclusively by persons
who have received instruction in such work.
The plant operator must ensure that all maintenance, inspection and installation work is performed
byauthorizedandqualiedspecialistpersonnelwhohavebeenbriefedbythoroughly
studying the technical documentation.
2.4. Compatible products
The STULZ UltraSonicBNBultrasonichumidieriscompatiblewiththefollowingSTULZproducts:
●
STULZ ion exchanger SD 2800
●
STULZ UltraWater reverse osmosis system
●
STULZ conductivity measuring kit
●
STULZ USM control cabinets USM 503, USM 1303, USS 503, USS 1303
●
STULZ ON/OFF electronic control module