Stulz BNB Series - Formatting; Nomenclature; Liability Claims for Defects; Exclusion of Liability

© STULZ GmbH, Hamburg EN / 10-2015 / 1000683
-
7
-
STULZUltraSonic-SystemforDirectRoomHumidicationBNB-  Informationonthisdocument
1.7. Liability claims for defects
Following the assembly and operating instructions in this Technical Manual is a prerequisite for trou-
ble-free operation of the STULZUltraSonicBNBultrasonichumidier and for potential claims for defects.
Read the Technical Manual before working with the product.
1.8. Exclusion of liability
Following the assembly and operating instructions in this Technical Manual is a prerequisite for safe
operationoftheproductandforattainingthespeciedproductcharacteristicsandperformancefeatures.
STULZshallnotbeliableforanyinjuryorpropertydamageoranynanciallossresultingfromnon-
compliance with the assembly and operating instructions. In such cases, all liability for material defects is
excluded.
1.9. Copyright
All brand and product names are trademarks or registered trademarks of the products bearing these
names. UltraSonic® is a registered trademark of STULZ GmbH.
All rights reserved, including in respect of this translation. No part of this document may be reproduced in
anyform(e.g.printing,photocopying,microlm,datatransferorothermethod)orduplicatedorpro-
cessed by electronic means, without the written consent of STULZ GmbH.
Technical data subject to change without notice.
1.5. Formatting
Format Name Example
bold
Operating states
Values that require setting
ON or OFF.
Set the voltage to 7.5 V .
italic References in the document Prerequisite, procedure, result
" XX" Buttons Press the "►" button
1.6. Nomenclature
Full name Name in this document
STULZUltraSonicBNBultrasonichumidier Ultrasonichumidier
STULZ UltraSonic Master USM
STULZ UltraSonic Slave USS
STULZ heat exchanger terminal module FDSX Heat exchanger terminal module FDSX
Table 1: Nomenclature