Stulz BNB Series - Page 87

© STULZ GmbH, Hamburg EN / 10-2015 / 1000683
-
87
-
STULZUltraSonic-SystemforDirectRoomHumidicationBNB-  Maintenance
7
Insert a new transducer
including new seal, and screw tight.
8
Reconnect the supply cable and assem-
ble the unit in reverse order.
CAUTION
Trapped cables
.
During installation, take care not to trap any ca-
bles between parts of the housing!
NOTICE
CAUTION
Correct seating of seals
.
Make sure that seals are correctly seated!
NOTICE