Stulz ENS 18 A - Qualification requirements for personnel

DE / 06-2016 / 1000687 © STULZ GmbH, Hamburg
-
8
-
Safety STULZ UltraSonic -System for duct humidication ENS 14 A - 18 A-
VORSICHT
Danger due to incorrectly congured components..
During installation and conguration, it may be necessary to additionally congure further components
for use with the STULZ UltraSonic ENS ultrasonic humidier.
●
Before start-up, always check the current conguration of all affected components (refer also to the
documentation of the respective components).
IMPORTANT
2.3. Qualication requirements for personnel
All electrical work must be performed exclusively by authorized specialist electricians. Specialist person-
nel within the context of this documentation are persons who are familiar with the electrical installation,
start-up, maintenance and repair of the system, and are in possession of the following qualications:
●
Successful, certied completion of training in electrical engineering
●
Familiarity with the technical documentation
All water installation work must be performed exclusively by authorized and trained specialist personnel.
Specialist personnel within the context of this documentation are persons who are familiar with the elec-
trical installation, start-up, maintenance and repair of the system, and are in possession of the following
qualications:
●
Instruction by an expert
●
Familiarity with the technical documentation
All work relating to transport, storage and operation must be performed exclusively by persons who have
received instruction in such work.
The plant operator must ensure that all maintenance, inspection and installation work is performed by
authorized and qualied specialist personnel who have been briefed by thoroughly studying the technical
documentation.
2.4. Compatible products
The STULZ UltraSonic ENS ultrasonic humidier is compatible with the following STULZ products:
●
STULZ ion exchanger SD 2800
●
STULZ UltraWater reverse osmosis system
●
STULZ conductivity measuring kit
●
STULZ USM control cabinets USM 1303, USS 1303