Stulz ENS 18 A - Formatting; Nomenclature; Liability Claims for Defects; Exclusion of Liability

© STULZ GmbH, Hamburg DE / 06-2016 / 1000687
-
5
-
STULZ UltraSonic -System for duct humidication ENS 14 A - 18 A- Information on this document
1.7. Liability claims for defects
Following the assembly and operating instructions in this Technical Manual is a prerequisite for trouble-
free operation of the STULZ UltraSonic ENS ultrasonic humidier and for potential claims for defects.
Read the Technical Manual before working with the product.
1.8. Exclusion of liability
Following the assembly and operating instructions in this Technical Manual is a prerequisite for safe
operation of the product and for attaining the specied product characteristics and performance features.
STULZ shall not be liable for any injury or property damage or any nancial loss resulting from
non-compliance
with the assembly and operating instructions. In such cases, all liability for material defects is
excluded.
1.9. Copyright
All brand and product names are trademarks or registered trademarks of the products bearing these
names. UltraSonic® is a registered trademark of STULZ GmbH.
All rights reserved, including in respect of this translation. No part of this document may be reproduced in
any form (e.g. printing, photocopying, microlm, data transfer or other method) or duplicated or pro-
cessed by electronic means, without the written consent of STULZ GmbH.
Technical data subject to change without notice.
1.5. Formatting
Format Name Example
bold
Operating states
Values that require setting
ON or OFF.
Set the voltage to 7,5 V.
italic References in the document Prerequisite, procedure, result
„ XX“ Buttons Press the „►“ button
1.6. Nomenclature
Full name Name in this document
STULZ UltraSonic ENS ultrasonic humidier Ultrasonic humidier
STULZ UltraSonic Master USM
STULZ UltraSonic Slave USS