Stulz ENS 18 A - Sizes; Rating Plate

© STULZ GmbH, Hamburg DE / 06-2016 / 1000687
-
13
-
STULZ UltraSonic -System for duct humidication ENS 14 A - 18 A- Product description
4.1. Sizes
The STULZ UltraSonic ENS model series is available with different humidier capacities:
• ENS 14 A (Art.Nr.: K 87009)
• ENS 18 A (Art.Nr.: K 87010)
Technical features:
• 14 - 18 kg/h humidier capacity
• 24-30 integrated transducers
• Stainless steel housing WNr. 1.4301 (X5CrNi18-20) + WNr. 1.4106 (X2CrNi19-11)
CAUTION
Adiabatic behavior.
STULZ UltraSonic humidiers atomize the water in minuscule droplets (< 0.001 mm). The mist (aero-
sols) produced in this way draws heat from the surrounding air (enthalpy) and changes its state from u-
id to aqueous. This "adiabatic" behavior (removal of heat from surrounding air) cools the air in the room.
Note
4.2. Rating plate
The rating plate contains the most important data for identication of the STULZ UltraSonic ENS ultra-
sonic humidier and about the application limits. The rating plate is afxed to the side of the humidier.
The data on the rating plate are required for the following:
●
Safe use of the STULZ UltraSonic ENS ultrasonic humidier
●
When phoning the STULZ hotline with questions
The rating plate must be permanently afxed to the humidier.
Model
Example
rating plate
Manufacturer's
address
STULZ GmbH Klimatechnik 22457 Hamburg Tel: 040/5585-0
Typ ENS 14 A
Aufnahmeleistung/
power consumption
65 W
Leistung/
capacity
14 l/h
Spannung/
power supply
48 V~