Stulz ENS 18 A - Design and planning

DE / 06-2016 / 1000687 © STULZ GmbH, Hamburg
-
24
-
Design and planning STULZ UltraSonic -System for duct humidication ENS 14 A - 18 A-
5. Design and planning
This section deals only briey with the main aspects of design and planning. You can obtain more
detailed information in our STULZ UltraSonic Planning Guide.
Please refer to our STULZ UltraSonic Planning Guide for more information.
Visit our web site at www.stulz.com.
Here you can download our certicates.
For effective planning, you must take account of different sizes and boundary conditions:
1) Installation conditions
●
Location (elevation above sea level)
●
Room volume
●
Room air temperature
●
Relative and specic room air humidity
●
Air change rate (forced ventilation, air changes induced by air transfer)
●
Ambient air quality
●
Power connection
●
Water connection
●
Water quality of drinking water
2) Process requirements
●
Type or design
●
Application
●
Water quality of demineralized drinking water
●
Heat loads (e.g. waste heat from machinery)
●
Required room climate after humidication (temperature, relative and specic humidity)
●
Are there moisture sinks or moisture reservoirs
●
Humidier distance
3) System selection
●
Energy efciency
●
Acoustics
●
Hygiene
●
Running costs
●
Purchase costs