Black plate (141,1)
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
& High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
& Cruise control indica-
tor light
This light illuminates when the “CRUISE”
main switch is pressed.
If you press the main switch button while
turning the ignition switch “ON”, the cruise
control function is deactivated and the
“CRUISE” indicator light flashes. To re-
activate the cruise control function, turn
the ignition switch back to the “Acc ” or
“LOCK” position, and then turn it again to
the “ON” position.
& Cruise control set in-
dicator light
This light illuminates when vehicle cruising
speed has been set.
& Front fog light indicator
light (if equipped)
This indicator light is on while the front fog
lights are on.
& Headlight indicator
light
This indicator light illuminates when the
headlight switch is placed in the “
” or
“
” position.
Clock
The clock shows the time while the
ignition switch is in the “Acc” or “ON”
position.
The time changes by 1 minute each time
the “+” button or “−” button is pressed.
Pressing the “+” button moves the dis-
played time forward, while pressing the “−”
button moves the displayed time back.
Pressing and holding e ither button
changes the displayed time continuously.
Instruments and controls 3-25
– CONTINUED –
3
To Next Page
Loading...
