Subaru 2012 Forester - Downloading Picture; Selecting Picture; Erasing Picture

Black plate (234,1)
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-56 Audio
– Pressing the power switch
. Insert a CD (except reloading a CD)
. Connect a USB storage device or an
iPod
®
NOTE
The screensaver is not displayed under
the following conditions.
. While the ignition switch is in the
“LOCK” position
. While the audio is OFF
. While the screen is OFF
. While talking on a cell phone regis-
tered in the Hands-free system
. While setting the audio
. While seek tuning, PTY group tun-
ing, scan tuning or auto-storing while
the FM/AM radio is on.
. While in the category search mode
of the satellite radio
. While the rear view camera is being
used
& Downloading picture
Perform the following procedure to down-
load a picture to be used as screensaver.
1. Connect a USB storage device. Refer
to “Connecting USB storage d evice /
iPod
®
” F5-33.
2. Select the “Picture Download” menu
by operating the “TUNE/TRACK/CH” dial.
For details, refer to “Audio settings (type D
audio)” F5-10.
3. Select the preferred JPEG file by
operating the “TUNE/TRACK/CH” dial.
4. Select “Wide” or “Normal” by operating
the “TUNE/TRACK/CH” dial.
NOTE
. JPEG files that are 10 MB or less can
be saved.
. If the file name is too long, the file
may not be saved.
. Up to two JPEG files can be saved in
the in-vehicle equipment.
. If the aspect ratio of the displayed
picture is 16:9, “Wide” cannot be
selected.
. If the aspect ratio of the displayed
picture is 4:3, “Normal” cannot be
selected.
& Selecting picture
1. Select the “Picture Select” menu by
operating the “TUNE/TRACK/CH” dial. For
details, refer to “Audio settings (type D
audio)” F5-10. If no pictures are saved,
“No Data” is displayed. Press the
button to return to the “Screen Saver”
mode.
2. Select the preferred picture by operat-
ing the “TUNE/TRACK/CH” dial.
& Erasing picture
1. Select the “Picture Erase” menu by
operating the “TUNE/TRACK/CH” dial. For
details, refer to “Audio settings (type D
audio)” F5-10. If no pictures are saved,
“No Data” is displayed. Press the
button to return to the “Screen Saver”
mode.
2. Select the preferred picture by operat-
ing the “TUNE/TRACK/CH” dial.
3. Operate the “TUNE/TRACK/CH” dial
to select “OK” to erase the picture or
“Cancel” to cancel the operation.