Subaru 2012 Forester - Rear Window Wiper Blade Assembly; Rear Window Wiper Blade Rubber

Black plate (389,1)
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
& Rear window wiper blade
assembly
1. Raise the wiper arm off the rear
window.
2. Turn the wiper blade assembly coun-
terclockwise.
3. Pull the wiper blade assembly toward
you to remove it from the wiper arm.
4. Install the wiper blade assembly to the
wiper arm. Make sure that it locks in place.
5. Hold the wiper arm by hand and slowly
lower it in position.
& Rear window wiper blade
rubber
1. Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
Maintenance and service 11-41
– CONTINUED –
11