Black plate (290,1)
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
7-32 Starting and operating
& Hill start assist warning light
Refer to “Hill start assist warning light (MT
models)” F3-21.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal. It is
operative when the vehicle speed is 25
mph (40 km/h) or more.
WARNING
Do not use the cruise control under
any of the following conditions. This
may cause loss of vehicle control.
. Driving up or down a steep grade
. Driving on slippery or winding
roads
. Driving in heavy traffic
. Towing a trailer
NOTE
. If you press the “CRUISE” ma in
switch button while turning the ignition
switch “ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. Make sure the “CRU ISE” main
switch is turned off when the cruise
control is not in use to avoid uninten-
tionally setting the cruise control.
& To set cruise control
1. Push the “CRUISE” main switch but-
ton.
To Next Page
Loading...
