Subaru 2012 Forester - Page 310

Black plate (232,1)
北米Model "A8170BE-A" EDITED: 2011/ 6/ 24
5-54 Audio
LOCKED” is displayed and the phone-
book is unlocked.
! Phone setup
After selecting the “PHONE SETUP”
menu, perform the following procedures.
! Setting pair phone
Refer to “Preparation for using the Hands-
free system” F5-45.
! Selecting phone
To select the registered cell phone for
connecting to the in-vehicle equipment,
perform the following procedure.
1. Select the “SELECT PHONE” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by performing
either of the following procedures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONF IRM” menu (only
after saying the voice tag). “SELECTED”
is displayed, the selected cell phone is
connected to the in-vehicle equipment and
the mode changes to the “PHONE SET-
UP” mode.
! Changing the voice tag of the cell
phone
1. Select the “CHANGE NAME” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by performing
either of the following procedures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Register the voice tag. For details,
refer to “Preparation for using the Hands-
free system” F5-45.
! List phones function
The cell phone voice tags saved in the cell
phone list are spoken by using the list
phones function.
1. Select the “LIST PHONES” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Registered cell phones are displayed
on the saved side. While displayed, if the
“TUNE/TRACK/C H” dial is turned, the
next registered cell phone is displayed.
Press the ON hook button
to close the
Hands-free menu.
3. Select a cell pho ne by per forming
either of the following procedures.
– Operate the “TUNE/TRA CK/CH”
dial.
– Press the talk switch
.
4. After “SELECTED” is displayed, select
the following menus.
. “SELECT PHONE” to connect the
selected cell phone
. “CHANGE NAME” to change the voice
tag
. “DELETE” to delete the selected cell
phone from the list
. “GO BACK” to go back to the “PHONE
SETUP” mode
! Setting passkey
1. Select the “ SET PASSKEY” menu.
After the currently set passkey is dis-
played, a new passkey can be entered.
2. Input the new passkey by performing
either of the following procedures.
– Operate the “TUNE/TRA CK/CH”
dial.
– Press the talk switch
and say
the passkey.
3. Select the “CONFIRM” menu. The new
passkey is displa yed, the pass ke y is
changed and the mode changes to the
“PHONE SETUP” mode.