Suez CheckPoint Pharma - Installation Guide; Unpack and Inspect the Sensor

CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018 45 of 112 DLM 97200-03 EN Rev. A
Chapter 4 — Installation
Unpack and Inspect the Sensor
Open the shipping box and verify that it contains the following:
• Sievers CheckPoint Pharma (or CheckPoint
e
) Portable/On-Line TOC Sensor
• Accessory package containing:
• CheckPoint Pharma and CheckPoint
e
Portable/On-Line TOC Sensors Operation and
Maintenance Manual (CD-ROM)
• CheckPoint Pharma and CheckPoint
e
Portable/On-Line TOC Sensors Quick Standard
Protocols Operating(CD-ROM)
• Certificate of Calibration
• Accessories:
• Mounting bracket
• 1/8" sample inlet tubing (with fittings)
• 1/8" sample waste tubing (2, including “tee” and short tubing to route to tee)
• AC conduit ground wire, 16-14 American Wire Gauge (AWG)
• Flathead screwdriver
• Panel for use with power conduit
• Terminal block (for wiring power conduit)
• Stainless steel metric tubing converter (1/4-in-to-6-mm tube)
• 1/4" to 1/8” reducing adapter
• Reducing ferrule and knurled nut
• 1/4" cap for sample line
• ESD wrist strap
• Flow rate calibration kit (Bypass port plug; drain tubing; graduated cylinder)
• Adhesive tubing clip
• Power Cord
• Optional items:
• Vial Sampling Kit
• Low-Pressure Sampling Kit