Suez CheckPoint Pharma - Standby Mode; Navigation Keys

CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018 60 of 112 DLM 97200-03 EN Rev. A
Standby Mode
When the Sensor is not in performing on-line, it can be placed in Standby mode by pressing the Stop
button and then pressing F1. When the Sensor is in standby mode and running on AC power, the
sample pump stops running and the UV lamp remains on. When the Sensor is in standby mode and
running on battery power, the sample pump stops running and the UV lamp turns off.
Navigation Keys
The Horizontal Scroll Bar scrolls left and right, and the Vertical Scroll Bar scrolls up and down.
The scroll bars have three modes of operation, which are activated depending on how you press the
buttons:
• Stroke mode lets you move rapidly by stroking the scroll bar (move your finger or stylus from
one end of the scroll bar to the other) in the direction you want to scroll.
• Auto-repeat mode lets you press and hold the arrow that corresponds to the direction you
want to scroll. Scrolling will accelerate as you hold the button down.
• Tap mode lets you tap one of the two arrows to scroll one line in the direction indicated by the
arrow.
Figure 21: The Horizontal and Vertical Scroll Bars
The Backspace key deletes the character to the left of the cursor.
Figure 22: Backspace Key
The Enter key is used to select an item or value from a group.
Figure 23: The Enter Key