Suez CheckPoint Pharma - Clock; Units of Measure; Instrument Name; LCD Contrast

CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018 69 of 112 DLM 97200-03 EN Rev. A
Clock
From the Clock screen, either press F1 to display the Set Date screen or F2 to display the Set Time
screen. The Horizontal Scroll bar selects between the various date or time fields; the Vertical Scroll
bar changes the value in the selected field.
Units of Measure
From the Units screen, press F1 to toggle the units of measure between temperature-compensated
conductivity (µS/cm), resistivity (M-cm), and RCond (US/CM) Temp (C).
Instrument Name
The Name screen displays the current Sensor name, and allows you to change the name. The
Horizontal Scroll bar moves the cursor left or right through the character. The Vertical Scroll bar
changes the value of the selected field.
LCD Contrast
The LCD Contrast screen allows you to change the contrast setting for the Sensor’s display. Use the
Vertical Scroll bar to change the value of the contrast setting, then press F1 to apply or F4 to cancel.
Language Selection
The Sensor supports menu display in English, Simplified Chinese, and Japanese. Use the Vertical
Scroll bar to select the language and then press the Enter button.
Inverse Display
By default, the Sensor’s display screen displays white characters on a blue background. You can
invert the display to show blue characters on a white background by pressing F1 on the Setup
screen.