To Next Page
J
James NelsonSep 14, 2025
Why can't I get the drying air hot enough in my Sukup Fastir?
- MMichael SmithSep 14, 2025
If you cannot get the drying air hot enough, it may be because the LP gas vaporizes too slowly. Provide a vaporizer on the burner.
Why can't I get the drying air hot enough in my Sukup Fastir?
If you cannot get the drying air hot enough, it may be because the LP gas vaporizes too slowly. Provide a vaporizer on the burner.
What to do if the Sukup Farm Equipment gearmotor is not turning when augers are vertical?
If the gearmotor isn't turning while the augers are vertical, several issues could be the cause. First, check the plug-in for proper voltage using a voltmeter to ensure there is electricity. Also, there may be an automatic thermal overload shut off, so check the plug-in for proper voltage and inspect for any binding or obstruction on the track or tube. The thermal overload in the field of the gearmotor might be weak, in which case you should replace the field in the gearmotor. The gears may be out of the gearmotor, so feel if the gearmotor is running; if it is, the gears must be replaced. The capacitor could be bad, so replace it. Finally, the tilt switches on the augers might be shutting off the gearmotor on the center hanger. Hold down the bypass button on the junction box; if the gearmo...
Safety guidelines specific to grain bin operations.
Requirements and recommendations for PPE.
Procedures and contact information for emergency situations.
Instructions for applying and replacing safety decals.
Step-by-step guide for installing the track system.
Procedures for assembling and mounting the machine carriages.
Steps for mounting and securing the machine motors.
Instructions for timing and adjusting the reversing mechanism.
Electrical wiring steps for the gearmotor.
Steps for installing the down augers onto the carriage.
Concluding installation tasks and checks.
How to start, operate, and manage the machine during drying.
Routine checks and maintenance for the machine.
Procedures for testing gearmotor continuity and function.
How to check and adjust the reversing mechanism alignment.
Fundamentals of grain drying, airflow, and temperature effects.
Factors and formulas for choosing the correct heater.
Proper placement of fans, heaters, and controllers on bins.
Warnings and guidelines to prevent fires during grain drying.
Guidelines for safe grain storage, moisture content, and duration.
Purpose and methods of grain aeration for temperature control.
Regular maintenance checks for the grain bin and associated systems.
Wiring diagrams for single auger configurations.
Wiring diagrams for double auger configurations.
Wiring diagrams for triple auger configurations.
Wiring diagrams for four auger configurations.
Detailed parts list and diagrams for the track assembly.
Parts and diagrams for the center hanger assembly.
Parts and diagrams for wrap-around carriage assemblies.
Detailed parts list and diagrams for the primary carriage.
Detailed parts list and diagrams for the satellite carriage.
Parts and diagrams for the stationary outside carriage.
Parts and diagrams for the electrical junction box.
Parts and diagrams for the reversing mechanism assembly.
Parts and diagrams for the rotating contact assembly.
Parts and diagrams for the gearmotor.
Table detailing cord lengths for various configurations.
Table listing electrical components by model and size.
General| Brand | Sukup |
|---|---|
| Model | Fastir |
| Category | Farm Equipment |
| Type | Grain Dryer |
| Construction | Galvanized steel |
| Fuel Type | Propane or Natural Gas |
