1-6
1. Introduction｜Structure
1．Introduction
HEATER key
Starts/cancels the heating
cycle of the heat shrink oven.
POWER key
Turns on and off the splicer. LED
illuminates while the splicer is on.
RESET key
Cancels the splicing process.
Initialization
SET key
Starts the splicing process.
■Heat shrink oven
1
3
2
1
3
■Keypad
Heat shrink oven
clamps
Heating plate
2
Heat shrink oven lid
Keys are equipped on the top of the splicer. There are also SET, RESET and
HEAT icons on the touchscreen monitor.
Heating plate
Heats fiber protection sleeve.
Heat shrink oven clamps
Hold fibers straight.
Heat shrink oven lid
To Next Page
Loading...
