1-7
1. Introduction｜Structure
1．Introduction
Bare fiber pads
Hold fibers seated into the V-
grooves. Normally they are
attached to the hood.
LED for fiber observation
Illuminates the fiber and make
an image on the microscope.
Electrode cover plate
Holds the electrode seated
into the retaining groove.
Lens protection
lass
Protects the lens surface.
Microscope ob
ective lens
Fiber is observed through the
lens.
V-
roove illumination
Illuminates the V-groove. Lit
when the hood is opened.
Electrodes
Arc is generated between the
electrodes.
■V-
rooves, electrodes, other components
8
9
1
2
3
5
6
4
7
Fiber coatin
clamp
Holds fiber coating.
V-grooves
Keep bare fibers aligned.
To Next Page
Loading...
