4-10 Netra Internet Server 3.1 User’s Manual—September 1996
4
3. Enter setup for the User ID; then enter setup for the Password.
The Netra Welcome page is displayed.
4. Select the Administration option.
The Initial Configuration page is displayed with the remaining
configuration tasks.
5. If you want to install a localized version of your Netra software, perform
the following tasks; if not, proceed to Step 6.
a. Select the Install localized Netra software option.
The Software Management Administration page is displayed.
b. Insert the localization CD-ROM in the Netra CD-ROM drive.
c. Select the Select new installation medium option.
d. Select CD-ROM as the installation medium.
e. Select Install: Clusters.
The Installing Clusters page is displayed with a pair of clusters (required
and optional) for each locale. For example, the localized software for
Japan is contained in the Required Japanese Netra Software and
Optional Japanese Netra Software clusters.
f. Select the two clusters for your locale.
You must install the Required cluster. The Optional cluster is
necessary only if you want to install additional Solaris software.
g. Once you install the locale-specific clusters, return to the Initial
Configuration page.
6. Select the highlighted System Defaults option.
The System Defaults Administration page is displayed with the current
time, date, time zone, and default locale.
7. If necessary, enter a new time and date using the displayed format.
8. If necessary, select a new default system time zone from the scrolling list.
9. If you have installed localized Netra software, select a new default system
locale from the scrolling list; if not, proceed to Step 10.
10. Use the Forward Arrow icon to go directly to the next configuration task.
To Next Page
Loading...
