xviii Sun Fire 280R Server Service Manual • January 2001
How to Avoid Electrostatic Discharge 35
About Communicating With the System 37
How to Attach an Alphanumeric Terminal 38
How to Configure a Local Graphics Console 39
2. Servicing the Main Logic Board and Components 43
How to Remove a Memory Module 44
How to Install a Memory Module 46
How to Remove the RSC Card 50
How to Replace the RSC Card 54
How to Remove a PCI Card 58
How to Install a PCI Card 61
How to Remove a CPU Module 65
How to Install a CPU Module 69
How to Remove the ID SEEPROM Module 74
How to Replace the ID SEEPROM Module 77
How to Remove the Air Guide 79
How to Replace the Air Guide 81
How to Remove the Main Logic Board 82
How to Replace the Main Logic Board 85
How to Set the Flash PROM Jumpers 88
3. Removing and Installing Storage Devices 91
How to Remove a Disk Drive 92
How to Install a Disk Drive 94
How to Remove a Disk Drive Using the Hot-Plug Operation 97
How to Install a Disk Drive Using the Hot-Plug Operation 101
How to Remove the Removable Media Assembly 104
How to Replace the Removable Media Assembly 107
To Next Page
