Chapter 5 Removing and Replacing Miscellaneous Assemblies 149
What Next
To reassemble the system, complete this task:
■ “How to Replace the System Cover” on page 33
How to Remove a System Door
Before You Begin
Complete these tasks:
■ “How to Power Off the System” on page 5
■ “How to Position the System for Service” on page 14
What to Do
1. Unlock the system doors and swing them open.
Turn the keyswitch to the Power-On/Off position. This unlocks the system front
access doors.
2. Remove the decorative panel from the flange on the chassis faceplate.
a. Remove the washers from the screws securing the decorative panel to the
flange on the front of the chassis.
The washers are on the captive screws that attach the chassis to the rack rails. Use
a Phillips No. 2 screwdriver.
To Next Page
