Chapter 4 Maintaining the Sun Fire V40z Server
4-11
9. In the SP SOL session that you launched in Step 1, you now see the output of the
BIOS CPU step screen.
For a sample of this output, see Step 1 in the previous procedure on page 4-9.
10. During the server’s memory self-test, terminate the remote session in order to
pause the screen:
a. Press Control-e.
b. Press the ‘c’ key.
c. Press the period key (.).
11. Verify the stepping version of the CPUs in the line similar to the following
examples:
2 Processors Detected, CG - CG
or
2 Processors Detected, E4 - E4
To Next Page
Loading...
