Sun Microsystems Sun Fire V20z - Escape Sequences for Remote Console Terminal

2-4 Sun Fire V20z and Sun Fire V40z Servers—User Guide • March 2005
2.3 Escape Sequences for Remote Console
Terminal
If you are accessing your server using a remote console terminal, you might need to
use the escape sequences shown in
TABLE 2-1. If a regular function key is not working
properly, use the escape sequence listed next to it in the table.
You will most likely need to use the escape sequences if you are using a Linux or
Solaris OS.
TABLE 2-1 Special Keys for Remote Console Terminal
Function Key Escape Sequence
HOME <ESC> h
END <ESC> k
INSERT <ESC> +
DELETE <ESC> -
PAGE UP <ESC> ?
PAGE DOWN <ESC> /
ALT <ESC>^A
CTRL <ESC>^C
F1 <ESC> 1
F2 <ESC> 2
F3 <ESC> 3
F4 <ESC> 4
F5 <ESC> 5
F6 <ESC> 6
F7 <ESC> 7
F8 <ESC> 8
F9 <ESC> 9
F10 <ESC> 0
F11 <ESC> !
F12 <ESC> @