Chapter 4 Maintaining the Sun Fire V40z Server 4-69
Refer to FIGURE 4-40 for the methods used to release cables from the various types of
connectors.
Caution – Use caution when removing cables because connectors and pins are very
fragile and can be damaged.
FIGURE 4-40 Types of Cable Connector
SCSI Signal Cable and Power Cable
Note – This procedure applies only to the SCSI signal cable in the updated release
of the Sun Fire V40z server (chassis PN 380-1206).
Do not attempt to replace the SCSI signal cable on the original release of the server
(chassis PN 380-1010).
To Next Page
Loading...
