C-1
APPENDIX
C
SCSI BIOS Configuration Utility
Using the Fusion-MPT SCSI BIOS Configuration Utility, you can change the default
configuration of your SCSI host adapters. You may decide to alter these default
values if there is a conflict between device settings or to optimize system
performance.
C.1 Starting the SCSI BIOS Configuration
Utility
The version number of the SCSI BIOS displays in a banner on your monitor during
boot. If the utility is available, the following message also appears:
Press Ctrl-C to start LSI Logic Configuration Utility.
This message remains on your screen for about five seconds, allowing you to start
the utility. If you press Ctrl-C, the message changes to the following:
Please wait, invoking LSI Logic Configuration Utility...
After a brief pause, your monitor displays the main menu of the Fusion-MPT PCI
SCSI BIOS Configuration Utility.
To Next Page
Loading...
