Contents
v
3. Maintaining the Sun Fire V20z Server 3–1
3.1 Tools and Supplies Needed 3–1
3.2 Powering Off the Server and Removing the Cover 3–2
3.2.1 Server Top-Cover Installation 3–3
3.3 Locations of Sun Fire V20z Components 3–4
3.3.1 SCSI ID Assignments 3–5
3.3.1.1 Linux-based Server 3–5
3.3.1.2 Solaris-based Server 3–5
3.4 Releases of the Sun Fire V20z Server 3–5
3.4.1 Versions of the Sun Fire V20z Server 3–6
3.4.1.1 Important Information 3–6
3.4.1.2 Solaris 9 OS Install-Time Update for a Super-FRU
Replacement 3–7
3.4.2 No Mixing of CPU Stepping Versions 3–8
3.4.2.1 Verifying the Stepping Version of the CPU 3–8
3.4.3 Support Guide for Half-Length PCI Card Removed 3–11
3.5 Customer-Replaceable-Unit Replacement Procedures 3–12
3.5.1 I/O Board 3–13
3.5.2 PCI Card 3–14
3.5.2.1 Supported PCI Cards 3–14
3.5.2.2 Adding or Replacing a PCI Card 3–14
3.5.3 SCSI Hard Disk Drive and Carrier 3–16
3.5.3.1 Removing an HDD and Carrier 3–16
3.5.3.2 Installing an HDD and Carrier 3–17
3.5.4 SCSI Backplane 3–18
3.5.5 CD-ROM/DVD-ROM/Diskette Drive Assembly 3–21
3.5.6 Operator-Panel Board and LCD Display 3–23
3.5.7 Power Supply 3–24
3.5.8 Cooling Fans 3–26
To Next Page
Loading...
