3-36 Sun Fire V20z and Sun Fire V40z Servers—User Guide • March 2005
■ The two halves of the 5-pin SCSI backplane power cable connector (1) are secured
with a hook.
■ The 68-pin SCSI ribbon cable (2) has no locking mechanism.
■ The small, flat cables (3, 4, 5 and 6) are attached using two different types of
zero-insertion-force (ZIF) cable connectors. Because of their small size, it may be
difficult to distinguish one connector type from the other.
Refer to
FIGURE 3-29 for the methods used to release cables from the various types of
connectors.
3. Before re-installing the cover on the server, check the routing of all cables for
obstructions.
Caution – Use caution when removing cables because they are fragile—the small,
flat, flexible cables and cable connectors are extremely sensitive.
FIGURE 3-29 Types of Cable Connector
To Next Page
Loading...
