Sungrow SG33CX User Manual

4 Mechanical Mounting User Manual
20
Type
Tool
crimping tool
RJ45 crimping
tool
Wire stripper
Hydraulic pliers

Other auxiliary tools that may be used
4.4 Moving the Inverter
Move the inverter to the specified position before installation. The inverter can
be moved manually or via a hoist.
4.4.1 Manual Transport
Lift and move the inverter to the destination by using the side handles and
bottom handles.
 Inappropriate moving operation may cause personal injury!
 It is recommended that at least two installers carry the inverter together
and wear protective equipment such as smash-proof shoes and gloves.
 Always beware of the gravity center of the inverter and avoid tipping.
The ground surface on which the inverter is to be placed should be
covered with a sponge pad, foam cushion or the like to prevent the
inverter bottom from scratches.

Sungrow SG33CX Specifications

General

Model	SG33CX
Manufacturer	Sungrow
Rated Power	33 kW
Max DC Voltage	1100 V
Max Efficiency	98.7%
Start Voltage	200 V
Total Harmonic Distortion	< 3%
Power Factor at Rated Power	1
DC Connection Type	MC4
Allowable Relative Humidity Range	0 - 100%
Operating Altitude	4000 m
MPPT Voltage Range	200 V - 1000 V
AC Voltage Range	310 V - 480 V
Rated Grid Frequency	50 Hz / 60 Hz
Adjustable Power Factor Range	0.8 leading to 0.8 lagging
Operating Ambient Temperature Range	-25 °C ... +60 °C
Communication	RS485