User Manual 4 Mechanical Mounting
25
Spare parts
4.6.2 Mounting Steps
Step 1 Assemble the mounting-bracket by using the connecting bar.
Step 2 Level the assembled mounting-bracket by using the level, and mark the
positions for drilling holes on the installation site.
Step 3 Insert the expansion bolts into the holes and secure them with a rubber
hammer. Fasten the nut with a wrench to expand the bolt. Remove the
nut, spring washer, and flat washer, and store them properly.
Step 4 Fix the mounting-bracket with the expansion bolts.
To Next Page
Loading...
