7.2 Return
Enter setup of auto return mode (Return) to set the function that the instrument
automatically exit the setup menu after a period of time without pressing any key. The
“Manual Exit” means that it needs to exit calibration setup menu manually, while
“Auto” means that the display automatically exit the calibration setup menu and back
to measurement mode after a period of time without pressing any key.
Note: the return function of setup menu and calibration setup menu are independent
settings.
Enter “Password (Code)” Setup
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press to confirm it.
Pressʳ or ʳʳ
to adjust “minute”
part, and press
to confirm it and
move to ”second” part.
Pressʳ or ʳʳ
to select Auto return
or manual exit.
мн
To Next Page
Loading...
