6.8 Wash time(Clean) 23
6.9 Analog output 1 (Cond/Res)
24
6.10 Analog output 2 (˧emperature)
25
6.11 Date/Time (Clock)
26
6.12 Sample average of measurements (Digital filter)
27
6.13 Backlight settings 28
6.14 Contrast settings 29
6.15 Power frequency (Freq.) 30
6.16 Automatically back to measurement mode(Return) 31
7. Calibration
Block diagram of Calibration 32
7.1 Entry of calibration menu
33
7.2 Automatically back to measurement mode(Return) 34
7.3 Security password of calibration 35
7.4 Cell constant calibration (CELL Const.) 36
7.4.1 Resistivity (Res) 36
7.4.2 Conductivity (Cond) 37
7.5 Standard solution calibration (Std. Sol.) 38
8. Error messages (Error code)
39
9. Installation of cells
9.1 Appearance of cells
40
9.2 Correct installation 40
9.3 Incorrect installation 41
To Next Page
Loading...
