SUPERIOR CONTROLS STERLING CONTROLLERS User Manual

EXAMPLE: If cycling is to end at 5:00 p.m., press the following keys:
8. Set Delay Between Cycles: During the cycling period, watering cycles
will repeat immediately unless a delay is scheduled. The “OFF” time
between cycles can range from 1 minute to 4 hours and 15 minutes
(regardless of whether the program is running in minutes mode or
seconds mode). To schedule a delay:
a. Key in number 90.
b. Press Sta. Water Time key.
c. Key in delay time (1 minute to 4 hours and 15 minutes).
d. Press Enter key.
EXAMPLE A: To schedule a 20 minute delay between cycles, press the follow-
ing keys
EXAMPLE B: To schedule a delay of 2 hours and 30 minutes between cycles,
press the following keys
Programmable Pause: This feature allows for a delay of 1 second to 59 sec-
onds between the time each station shuts off and next one turns on as stations
are sequencing through the cycle. The pause will be deducted from the previous
station’s water time. If a pause is desired, follow step #9.
9. Set Pause Between Stations:
a. Press 0 key.
b. Press Stn Water Time key.
c. Key in delay time (1 to 59).
d. Press Enter.
Page
33
5
THU
4
WED
0PM
%
0
ENTER
CYCLE
START
PM
%
9 0
02
MON
ENTER
STA
WATER
TIME
9 0
3
TUE
2
MON
0
ENTER
STA
WATER
TIME

SUPERIOR CONTROLS STERLING CONTROLLERS Specifications

General

Brand	SUPERIOR CONTROLS
Model	STERLING CONTROLLERS
Category	Controller
Language	English