4-36
Supermicro C7Z170-SQ Motherboard User’s Manual
Wait for "F1" for Error
This option sets whether the system will wait for the user to press "F1"
when an error is detected during POST. The options are Enabled and
Disabled.
Retry Boot
Select Enabled to force the system to reboot when system fails to boot.
The options are Disabled and Enabled.
Power Button Function
This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are Instant Off and 4
Seconds Override.
AC Loss Policy
Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power loss. Select
Power-On for the system power to be turned on after a power loss. Select
Last State to allow the system to resume its last power state before a
power loss. The options are Last State, Power On, Stay Off.
EUP Support
EuP, or Energy Using Product is a European energy-saving specica-
tion that sets a standard on the maximum total power consumption on
electrical products. Check the box to activate EUP support. The default
is Unchecked (Disabled).
To Next Page
Loading...
Need help?
General
