4-4
Supermicro C7Z170-SQ Motherboard User’s Manual
To set this feature, select Restore Defaults from the Save & Load menu
and click <OK>. These are factory settings designed for maximum sys-
tem stability.
Save All Settings Only
When you have completed the system conguration changes, select this
option to save all changes made. This will not reset (reboot) the system
and will not exit.
Save Changes and Exit
Select this option to save the current settings and exit Setup.
Save Changes and Reset
Select this option to save the current settings, exit Setup and reboot.
Discard Changes
Select this option discard any changes and return to Setup.
Exit without Save
Select this option to exit Setup without making any permanent changes
to the system conguration.
Discard Changes and Reset
Select this option to discard all changes to setup and reboot.
Profiles
The Proles icon brings up a pop-up menu that enables the user to choose
from two saving and loading locations. These locations can be used to
store new, or retrieve previously saved overclocking proles:
To Next Page
Loading...
Need help?
General
