Chapter 4: AMI BIOS
4-37
4-8 Input/Output
Set all options for the motherboard I/O in this section.
SATA
SATA Controllers
This item Enables or Disables the built-in SATA controllers on the moth-
erboard. The options are Enabled and Disabled.
SATA Mode Selection
This item selects the mode for the installed SATA drives. The options are
IDE, AHCI and RAID.
SATA Controller Speed (AHCI or RAID Mode only)
This item selects the SATA Controller Speed. The options are Default,
Gen1, Gen2 and Gen3.
If the item SATA Mode Selection above is set to AHCI, the follow-
ing items are displayed:
Port 0 ~ Port 5
This item Enables or Disables SATA Ports 0~5. The options are Enabled
and Disabled.
To Next Page
Loading...
Need help?
General
