Supero C7Z170-SQ User Manual

4-40
Supermicro C7Z170-SQ Motherboard User’s Manual
Onboard LAN Option ROM Type
Select the onboard LAN option ROM type. The options are Legacy and
EFI.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer us-
ing a PXE device installed in a LAN port specied. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled and PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unied Extensible Firmware Interface) for network stack support. The
options are Disabled and Enabled.
Ipv4 PXE Support (Available when Network Stack is set to
Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv4 PXE boot option will
not be supported. The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to
Enabled)
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv6 PXE boot option will
not be supported. The options are Enabled and Disabled.

Supero C7Z170-SQ Specifications

General

Brand	Supero
Model	C7Z170-SQ
Category	Motherboard
Language	English