Chapter 4: AMI BIOS
4-15
Active Processor Cores
Use this feature to select the number of active processor cores. The
options are All, 1, 2, 3 and 4 (These options depend on how many cores
are supported by the CPU.)
Load SMC CPU OC Setting
This item has optimized pre-congured overclock settings. Select one
to activate. The options are Manual, 3.5GHz~5.0GHz (in 100MHz in-
crements).
1-Core Ratio Limit Override
This increases (multiplies) 1 clock speed in the CPU core in relation to the
bus speed when one CPU core is active. Press "+" or "-" on your keyboard
to change the value. Enter 39 to use the manufacturer's default setting.
2-Core Ratio Limit Override
This increases (multiplies) 2 clock speeds in the CPU core in relation
to the bus speed when two CPU cores are active. Press "+" or "-" on
your keyboard to change the value. Enter 38 to use the manufacturer's
default setting.
3-Core Ratio Limit Override
This increases (multiplies) 3 clock speeds in the CPU core in relation
to the bus speed when three CPU cores are active. Press "+" or "-" on
your keyboard to change the value. Enter 37 to use the manufacturer's
default setting.
4-Core Ratio Limit Override
This increases (multiplies) 4 clock speeds in the CPU core in relation
to the bus speed when four CPU cores are active. Press "+" or "-" on
your keyboard to change the value. Enter 36 to use the manufacturer's
default setting.
RSR
This item enables or disables the RSR feature. The options are Disabled
and Enabled.
Boot Performance Mode
This option enables the selection of the default CPU performance during
system boot. The options are Max Non-Turbo Performance, Max Battery
and Turbo Performance.
To Next Page
Loading...
Need help?
General
