SUPER P4DC6/P4DC6+/P4DC6+II/P4DCE/P4DCE+/P4DCE+II User’s Manual
4-16
4-5 PnP/PCI Configurations
When the Item "PnP/PCI" is highlighted on the main menu bar, press the <Enter>
key to activate the following screen:
PCI Slot 1 IRQ Select
Use this setting to assign the IRQ# for PCI slot 1. The settings are "Auto", "3",
"4", "5", "7", "9", "10" and "11."
CPU Hyper-Threading
Set this option to "Enabled" to activate the hyper-threading function of the
CPUs. Enabling the hyper-threading function makes each CPU appear as two
to any programs that support it (you must have OS support also). The settings
are "Disabled" and "Enabled."
MPS Version Control for OS
Set this option to "Enable" to activate the version of MPS control for the OS.
The settings are "1.1" and "1.4".
CPU Clock Ratio
Use this option to set the clock ratio of the processor. The settings are "x8"
"x9", "x10", "x11", "x12", "x13", "x14", "x15", "x16", "x17", "x18", "x19", "x20",
"x21", "x22" and "x23".
To Next Page
Loading...
Need help?
General
