Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
4-50
4-8 Save & Exit
Select the Exit tab from the BIOS setup utility screen to enter the Exit
BIOS Setup screen.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent
changes to the system conguration, and reboot the computer. Select
Discard Changes and Exit from the Exit menu and press <Enter>.
Save Changes and Reset
When you have completed the system conguration changes, select
this option to leave the BIOS setup utility and reboot the computer, so
the new system conguration parameters can take effect. Select Save
Changes and Exit from the Exit menu and press <Enter>.
Save Changes
After completing the system conguration changes, select this option to
save the changes you have made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return
to the AMI BIOS utility Program.
To Next Page
Loading...
Need help?
General
