Supero X11SAE - Turbo Mode; Package Power Limit MSR Lock; Power Limit 1 Override; Power Limit 2 Override

Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
4-14
Turbo Mode
Select Enabled for processor cores to run faster than the frequency
specied by the manufacturer. The options are Disabled and Enabled.
Package Power Limit MSR Lock
Select Enabled to lock the package power limit for the model specic
registers. The options are Disabled and Enabled.
Power Limit 1 Override
Select Enabled to support average power limit (PL1) override. The default
setting is Disabled.
Power Limit 2 Override
Select Enabled to support rapid power limit (PL2) override. The default
setting is Enabled.
Power Limit 2
Use this item to congure the value for Power Limit 2. The value is in
milli watts and the step size is 125mW. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default
setting If the value is 0, the BIOS will set PL2 as 1.25* TDP.
1-Core Ratio Limit Override
This increases (multiplies) 1 clock speed in the CPU core in relation to the
bus speed when one CPU core is active. Press "+" or "-" on your keyboard
to change the value. Enter 0 to use the manufacture default setting.
2-Core Ratio Limit Override
This increases (multiplies) 2 clock speeds in the CPU core in relation to
the bus speed when two CPU cores are active. Press "+" or "-" on your
keyboard to change the value. Enter 0 to use the manufacture default
setting.
3-Core Ratio Limit Override
This increases (multiplies) 3 clock speeds in the CPU core in relation to
the bus speed when three CPU cores are active. Press "+" or "-" on your
keyboard to change the value. Enter 0 to use the manufacture default
setting.
4-Core Ratio Limit Override
This increases (multiplies) 4 clock speeds in the CPU core in relation to
the bus speed when three CPU cores are active. Press "+" or "-" on your
keyboard to change the value. Enter 0 to use the manufacture default
setting.