Supero X11SAE - PCH-IO Configuration

Chapter 4: BIOS
4-21
REFRESH_2X_MODE
Use this feature to select the refresh mode. The options are Disabled,
1-Enabled for WARM or HOT, and 2-Enabled HOT only.
Closed Loop Thermal Management
Use this feature to monitor the power consumption and temperature
of the system to predict a thermal trend. The options are Disabled
and Enabled.
GT - Power Management Control
The following GT - Power Management Control information will display:
• GT Info
RC6 (Render Standby)
Select Enabled to enable render standby support.The options are
Disabled and Enabled.
PCH-IO Configuration
The following PCH-IO information will display:
• Intel PCH RC Version
• Intel PCH SKU Name
• Intel PCH Rev ID
PCI Express Conguration
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management)
state on the SA (System Agent) side of the DMI Link. The options are
Disabled and Enabled.
Peer Memory Write Enable
Use this feature to enable or disable peer memory write. The options
are Disabled or Enabled.