Supero X11SAE - Page 91

Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
4-22
PCH SLOT3 PCI-E 3.0 X1
Port 7 ASPM
Use this item to set the Active State Power Management (ASPM) level
for a PCI-E device. Select Auto for the system BIOS to automatically
set the ASPM level based on the system conguration. Select Disabled
to disable ASPM support. The options are Disabled, L0s, L1, L0s & L1,
and Auto.
Port 7 L1 Substates
Use this feature to congure the PCI Express L1 Substates. The op-
tions are Disabled, L1.1, L1.2, and L1.1 & L1.2
Port 7 PCIe Speed
Use this feature to select the PCI Express port speed. The options are
Auto, Gen1, Gen2, and Gen3.
Port 7 Detect Non-Compliant Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E de-
vice that is not compliant with the PCI-E standards. The options are
Disabled and Enabled.
PCH SLOT7 PCI-E 3.0 X1
Port 8 ASPM
Use this item to set the Active State Power Management (ASPM) level
for a PCI-E device. Select Auto for the system BIOS to automatically
set the ASPM level based on the system conguration. Select Disabled
to disable ASPM support. The options are Disabled, L0s, L1, L0s & L1,
and Auto.
Port 8 L1 Substates
Use this feature to congure the PCI Express L1 Substates. The op-
tions are Disabled, L1.1, L1.2, and L1.1 & L1.2
Port 8 PCIe Speed
Use this feature to select the PCI Express port speed. The options are
Auto, Gen1, Gen2, and Gen3.
Port 8 Detect Non-Compliant Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E de-
vice that is not compliant with the PCI-E standards. The options are
Disabled and Enabled.