Supero X11SAE User Manual

Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
4-28
(IO=240h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; DMA), (IO=248h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12; DMA), (IO=250h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12; DMA), and (IO=258h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; DMA).
PCH-FW Configuration
The following Intel Server Platform Services information will display:
• ME Firmware Version Inforation
• ME Firmware Mode Information
• ME Firmware Type Information
• ME FW SKU Information
ME FW Image Re-Flash
Use this feature to enable or disable the ME Firmware image re-ash
capability. The options are Disabled and Enabled.
AMT Configuration
Intel AMT
Select Enabled to use Intel AMT (Active Management Technology) to
enhance system performance. The options are Enabled and Disabled.
BIOS Hotkey Pressed
Select Enabled to use the BIOS Hotkey feature. The options are Enabled
and Disabled.
Watch Dog
Select Enabled to allow AMT to reset or power down the system if the
operating system or BIOS hangs or crashes. The options are Disabled,
and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog Timer (above) is enabled. This is
a timed delay in seconds, before a system power down or reset after
a BIOS or operating system failure is detected. Directly enter the
value in seconds.
Serial Port Console Redirection
COM1 Console Redirection

Supero X11SAE Specifications

General

Brand	Supero
Model	X11SAE
Category	Motherboard
Language	English