3-6
Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
Battery Holder
1
2
Battery Installation
1. To install an onboard battery, follow the steps 1& 2 above and con-
tinue below:
2. Identify the battery's polarity. The positive (+) side should be fac-
ing up.
3. Insert the battery into the battery holder and push it down until
you hear a click to ensure that the battery is securely locked.
Attention! When replacing a battery, be sure to only replace it with
the same type.
This side up
Press down until
you hear a click.
3-5 Returning Motherboard for Service
A receipt or copy of your invoice marked with the date of purchase is
required before any warranty service will be rendered. You can obtain
service by calling your vendor for a Returned Merchandise Authorization
(RMA) number. For faster service, you may also obtain RMA authoriza-
tions online (http://www.supermicro.com/support/rma/). When you re-
turn the motherboard to the manufacturer, the RMA number should be
prominently displayed on the outside of the shipping carton, and mailed
prepaid or hand-carried. Shipping and handling charges will be applied
for all orders that must be mailed when service is complete.
This warranty only covers normal consumer use and does not cover
damages incurred in shipping or from failure due to the alteration,
misuse, abuse or improper maintenance of products.
During the warranty period, contact your distributor rst for any prod-
uct problems.
To Next Page
Loading...
Need help?
General
