Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 15
automatically download all logged data since the last download and store the log on the flash
drive. It will also store station setup and status on the flash drive.
It is possible to change station setup, upgrade Satlink firmware, and execute a batch file via a
flash drive. Please see section USB Thumb Drive for details.
3.9. RF Output
Satlink has a type N connector on the bottom of the Satlink and side of the SL3-SDI. See
Connecting the GOES/METEOSAT/INSAT antenna for details on how to connect an antenna to
Satlink. Never operate Satlink without connecting either an antenna or dummy load to this
connection.
To Next Page
Loading...